PISTONS
Choose which
pistons you wish to see:
HYPEREUTECTIC PISTONS
NEW PISTONS - FORGED
PISTONS
PRO-PISTONS KIT
HYPEREUTECTIC PISTONS
All
pistons below are for 5/64-5/64-3/16 rings
360 AMC Jeep 1970-88
#360-40
.Cyl bore .040 over- 367 CID
-With 58cc head- C.R. 8.7
-With 52cc head- C.R. 9.5
390 AMC Jeep 1968-70
#390-20
Bore at .020 over- 393 ci
With 58cc Head - C.R. 10.0
With 52cc Head - C.R. 10.9
Piston top messured at .020 below block
deck (1968-69 .
Heads combustion chambers volume must
be raised of 4cc ( 1970,
Or the C.R. will be higher
390 AMC Jeep
#390-40
Cyl bore at .040 over – 397 CID
-With 52cc head C.R. 9.3 to 9.5, ( 1968-70
401 # 2 - AMC Jeep 1971-76
#401-40
Cyl bore .040 over bore - 409 ci
-With 58cc head- C.R. 10.7
Deck at .000 -.005 , w/ stock combustion
chambers
NOTE:
Lower C.R. whit 58cc head, 10.2 C.R.
To down the C.R. the combustion chamber
most be modify, or receive high flow
unshroulded racing valve seat job to(
Should reading minimum 65cc volume)
Performance
Hypereutectic flat top Pistons
Jeep-AMC
V8 360 1970-89
Available in ( .040 over ) total bore
dia: 4.126
Street & strip application up to 7000
RPM
Made w/ high Silicone Alloy
Valve nutch clear up to .600 lift
Weight 630 grm
Price $ 360.00 set w/
Ring molly set,
Add $ 88.00 for light-weight
120 grm wrist-pin set.
Add $ 40.00 for 20 grm
lighter each pistons
Freight $ 19.00
SPECS:
- .040 over- 368 ci
- With 58cc head- C.R. 8.5
- Block deck shaved minus .035 the
C.R.- 10.3
- With 52cc head- C.R. 9.7
- Block deck shaved minus .035 the
C.R.- 10.3
AMC Hypereutectic
Pistons
Engine 390
390 AMC Jeep 1968-70
Available in (.20 over) total bore size
4.186
Up to 6800 RPM
Made w/ high silicone Alloy
Valve nutch clear up to .580 lift w/
2.08 Dia Valve
Weight 640 grm,
Price $ 399.00, with
rings molly set
Add $56.00 wrist-pin
set.
Add + $40.00 for light-weight
125 grm wrist-pin
Add $40.00 for 25 grm
lighter pistons
Freight $ 19.00
SPECS:
- .020 over- 392 ci
- With 58cc head- C.R. 8.9
- Deck shaved minus .025-.030 the
C.R.- 9.7
- With 58cc head- C.R. 9.4
- With 52cc head- C.R. 10.3
AMC Hypereutectic
Pistons
Engine 390
390 1970
Available in (.20 over) total bore size
4.186
Up to 6600 RPM
Made w/ high Silicone Alloy
Valve nutch clear up to .560 lift
Weight 640 grm
$395.00 set w/ Ring molly set,
add $36.00 for wrist-pin set.
Freight $19.00, add $40.00 for lighter
30 grm lighter
SPECS:
- With 58cc head- C.R. 9.3
- With 52cc head- C.R. 9.7
- Block desk can be shaved of .025
AMC Hypereutectic
Pistons
Engine 390
390 AMC Jeep
Available in (.20 over) total bore size
4.186
Up to 6600 RPM
Made w/ high Silicone Alloy
Valve nutch clear up to .560 lift
Weight 640 grm
$395.00 set w/ Ring molly set,
add $36.00 for wrist-pin set.
Freight $19.00, add $40.00 for lighter
30 grm lighter
SPECS:
- .040 over- 397 ci
- With 58cc head, .020 deck height
C.R. 10.1
- With 52cc head- C.R. 10.7
AMC
Hypereutectic Pistons
Engine 401
401 AMC Jeep 1971-76
Available in (.20 over) total bore size
4.186
Up to 6500 RPM
Weight 600 grms
Clear up to .550 valve lift, at 2.05
valve diameter
Price $399.00, with
Molly Rings
Add $56.00 wrist-pin
set.
Add $40.00 for light
weight 125 grms wrist-pin
Freight $19.00
SPECS:
- .020 over- 404 ci
- With 58cc head- C.R. 11.3
- Deck at .005
- The Cyl head colume could be at
64cc with a racing valve seat job,
or modify the combustion chamber
to down the CR ratio.
AMC Hypereutectic
light-weight Pistons
Engine 401
AMC Jeep 1971-76
Available in (.040 over) total bore
size 4.210
Up to 7200 RPM
Weight 520 grms
Clear up to .560 valve lift , at 2.08
valve diameter
Price $ 459.00 including
Molly Rings
Add $ 56.00 wrist-pin
set
Add + $ 40.00 for light-weight
125 grm wrist-pin
Freight $ 19.00
SPECS:
- .040 over- 409 ci
- To down the CR the cumbustion
chamber must be modifief, or receive
a racing valve seat job reading
63cc
info@amracing.com
Back to
the top
NEW PISTONS - FORGED
PISTONS
Super-Street
- Racing - or Nitrous
Give us just the C.R. and the COMP-HEIGHT.
All new Pistons we supply are custom
made and light weight, 100 g to 130
g lighter than factory emplacement parts.
Special oiling hole, Gas ports, Relocated
valve pocket available.
S-B Flat $520.00 S-B Dome $549.00
S-B Chevy Flat $499.00
B-B Flat $530.00 B-B Dome $585.00.
B-B Ford Flat or Dome $600.00
S-B Jeep six $425. V8 Flat $520.00
S-B AMC 390 and up $569.00 Dome $585.00
See "What
we do" for Bronze bushing
Light weight wrist Pin 98g .927 $129.00
or .990 $136.00
Moly Ring set S-B, B-B Chevy 1/16, 5/64
$49.95
Moly Ring set S-B $69.95, B-B $72.95
to $94.95
We can also supply after market, no
custom, pistons set flat and dome.
Price starts at $139.95
Send us an email for more information!
info@amracing.com
Back to
the top
PRO-Pistons Kit
Dodge
– Ford - Chevy
Only $550.00 !!! Check OUT !!
Complete W/ Forged Pistons, Moly rings
1/16, Wrist-pin,
Pin Fit hole, Pressure fed pin oiling,
Loxs, Symetrical Dome,
100 grms less then Stock !!!
Chevy
23 Degree
SB Flat top 2 V Pocket, - 5.4cc $550.00
Flat 4 Valve pocket - 8.7 cc $550.00
Chevy 23 Dome +8 cc $639.00
Chevy 23 D Reverse –20cc $639.00
Big-Block
Chevy
Flat Top $655.00
Dome +21cc- +47cc $695.00
Reverse Dome – 20cc $695.00
Chrysler
340 / 360 Stroker 4.00
Reverse Dome – 20cc $660.00
Flat top 3.58 Stroke $620.00
Chrysler
440 1.094 pin od
Flat top – 4 cc 10.0 C.R. w/78cc
$675.00
FORD302
Flat top - 5 cc 9.4 c.r. $599.00
Reverce Dome – 13 cc 8.6 cr $680.00
W 351 Flat – 5 cc 10.7 c.r. $599.00
Back to
the top
PICTURES
Click on picture
to view larger version
Information
All Above are in stock and
ready to ship, allowed 7 open days.
The freight cost is $ 20.00 in america.
The total price need to be receive before
shipping
This pistons are full warrenty of your
satisfaction, and can be refund if you
don’t use this.
Order processed with the SPEC :
Bore size – Stroke – Rod-length
– C.R. ccing head reading !
info@amracing.com
Back to
the top
